How to Install a Ghost Immobiliser
Ghost immobilisers can be a powerful deterrent for car thieves. Combining this device with other security tools and being vigilant will help you build strong defense against modern, tech skilled thieves.
Ghost immobilisers can safeguard your vehicle from hotwiring, key cloning and relay car theft by needing a pin code to start the engine. It is activated by buttons on your steering wheel or the centre console, which makes it unnoticeable to criminals.
Identifying the Wires
It is essential to secure your car since more and more vehicles are being taken without the owners' key. While thieves might be able to copy your key fob, or even steal the vehicle by hacking its system and stealing the vehicle, a ghost immobiliser provides an additional layer of protection by blocking all signals from the key fob, making it impossible to start your car without entering a PIN.
You can install the ghost immobiliser on your own, but it is recommended to have a professional handle the work. A professional with experience will know the best location to put the unit in, and also how to connect it to the wiring of your vehicle. Installation can be complicated and it is essential that all connections are done properly to avoid any damage or malfunctions.
To get the best results, you should work in a well-lit location and wear the appropriate safety equipment. You should also read through the user manual and familiarise yourself with the wiring system. This will help you identify the wires required for installation and ensure that you have the correct tools and parts to do the job right.
Once the wiring is connected, you can reconnect the battery and test the system to see whether it's functioning as intended. To avoid electrical issues, you should also ensure that the battery's terminals are secure. Additionally, you should label the CAN H and CAN L wires with labels or tape so that you can keep track of them during the installation process.
If you would like to allow another person to drive your vehicle temporarily for a valet parking or when the vehicle is being used for maintenance or repair, the Ghost Immobiliser can be turned on in Transport Mode. You can enter the code using the service button on the steering column, the centre console, or door panels. Then, the Ghost Immobiliser enters PIN code changing mode.
Some thieves try to circumvent the ghost immobiliser using jamming or spoofing devices to block or send false signals to the system. This can be prevented by investing in anti-jamming technologies and monitoring your Ghost immobiliser to detect signs that it has been tampered with.
Disconnecting the Battery
The ghost immobiliser, a cutting edge security device, is designed to prevent car theft. It utilizes cutting-edge technology to monitor the engine and deactivate it when the correct PIN is entered. This protects the vehicle from being taken by thieves. The system is highly effective and stealthy, as it does not have visible indicators to stop criminals. However, there could be an occasion when you have to remove the unit to perform maintenance or upgrades, or even to sell your car.
This procedure requires special tools and skills as you'll be working with wires, and removing certain factory components. Additionally, it is crucial to follow the step-by-step instructions provided by the manufacturer of the ghost immobiliser. It is also recommended to consult a professional mechanic or auto electrician, particularly if you don't have any experience working on vehicles.
It is crucial to examine the battery's condition after disconnecting the wires. Verify that the battery is clean, free of corrosion, and that all connections are secure. If necessary, think about replacing the battery to ensure that it is able to withstand the demands of a security system that is aftermarket.
Once you have disconnected the wiring from the battery, you can begin to remove the ghost immobiliser. Use strippers or wire cutters to carefully disconnect the wires, taking care not to harm the wires or their terminals. Make sure to label each wire to ensure that you are able to reconnect them correctly in the future. If the wires are soldered, use a tool that is heat-resistant to break the connection. To prevent short-circuiting, it is important to wrap the wires with insulation tape or heat shrink tubing.
Reconnect linked web-site to the 12V constant power source. If required you can use a fuse tap to ensure that the connections are protected by the fuse. Lastly connect the grounding wire to a grounded point on the vehicle's chassis.
Once you have reconnected your wires, restart your vehicle and enter your PIN. Then, try starting the engine once more. If it does not start, the ghost immobiliser has been removed successfully.
Making Connections
A ghost immobiliser can be an affordable method to improve the safety and security in your vehicle. It is connected to your vehicle's CAN bus system, which intercepts signals and preventing the engine from running until the correct PIN code is entered. It is virtually impossible to break which makes it a perfect choice for motorists who want additional security and peace of mind. It can lower the cost of insurance when used in conjunction with a Thatcham Approved Tracking System.
The process of obtaining and reviewing the wiring diagram of the vehicle model you are considering is crucial in the process of installing. The diagram serves as a reference guide for locating the wires needed to create precise connections. The connection will last and secure if you use the appropriate wiring connectors and soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system have to be identified and connected correctly. It is a good idea to use small pieces of tape or labels to identify the CAN H and L wires, as this will help to prevent confusion during the installation process. The location of these wires will be different on every vehicle, so it is essential to refer to the vehicle's wiring diagram and online resources when identifying them.
Once the correct wires are connected after which the power to the Ghost immobiliser will be restored. It is a good idea to test your immobiliser. Start the engine, but do not enter the code. This will ensure that the immobiliser is properly installed and working as intended. It is crucial to test your immobiliser regularly. This will allow you to identify any problems or issues early.
The ghost immobiliser is able to be installed quickly and without modifying your vehicle's wiring. It is also an excellent choice for those who wish to add extra security to their vehicles, as it can be used together with a Thatcham-approved alarm or tracker that will send a notification to your smartphone or tablet whenever the vehicle is altered.
Mounting the Unit
The Ghost immobiliser is a great an effective deterrent for car thieves especially when paired with a GPS tracking device. The device uses buttons on the centre console, doors and the steering wheel to create a unique sequence you are able to recognize. This prevents your car from starting. The device is also weatherproof and tamper-proof. It comes with a 3-year warranty and is recommended for use by a variety of insurance companies.
When installing the system, it's important to follow the instructions carefully. While some people are comfortable handling the work themselves, it's best to seek out a professional you are uncertain. Multimeters and wire strippers are vital tools to determine the wiring and make precise connections. It's also a good idea to purchase some electrical tape and insulation for safeguarding the connections from damage. After the installation is completed it's a good idea to check the device to confirm that it's functioning as intended.
Ghost immobilisers are an excellent option to protect your vehicle, especially in areas with high crime rates. It stops key cloning, ECU swapping and other security risks, and can be paired with an iPhone application for simple management and monitoring. It's a favorite option for car owners who want to safeguard their investment, and is easy to install.
The Ghost II immobiliser is designed in a low-profile, sleek design that makes it unnoticeable by thieves. It is connected to the CAN (Controller Area Network) system in your vehicle and prevents the engine from starting until a PIN code has been entered. The PIN code is generated by a unique sequence of keys on the steering wheel and centre console, as well as the doors. It can be changed at any time. The device is also tamper-proof and has an GPS tracking system that can assist police in locating your car in case of theft. It's a great option to protect your vehicle from thiefs and it's fully Thatcham-approved.