Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use keys or LEDs and is concealed in the wiring of the vehicle.
It also allows users to turn off the system temporarily by using Transport Mode for when they are renting out their vehicle. This guide will guide you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system is connected directly to the ECU of your car and secured by a PIN code you select. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and is unable to be disabled through circuit cuts.
The system is simple to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's security package.
To avoid an accidental deployment of airbags or short circuits The installer must first disconnect your battery. Once this is done the installer is able to safely begin work. Basic hand tools are helpful for securing connections with precision and a multimeter may be used to test electrical values and ensure safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. The Ghost Immobiliser user's guide will provide specific instructions tailored to your model.
During the installation process, it's crucial to select the right grounding location that is free of any paint or debris. Installers should also ensure that the immobiliser's wires CAN H and the CAN L are connected to the correct ECU ports. The wires can be connected or soldered based on the model. Using a high-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be turned on by the customer once the installation is complete. This allows valet parking or mechanics to use the vehicle without knowing the pin code. The user must press the icon for service on the dashboard five times in two seconds. After this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's an excellent option for those who regularly rents out their vehicles on platforms like Turo. An immobiliser can lower insurance costs since it greatly reduces the chance of theft.
Getting Started
It's not difficult to come up with an autowatch ignition device if you want to protect your car from thieves. The device stops your car from starting even when someone copies or steals your key. This is due to its high-tech technology that is designed to stop the car's engine from starting until the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle and allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the ultimate system to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing an immobiliser from Ghost is simple however, you must follow the instructions to avoid electrical problems and malfunctions of the system. First, you have to find and locate a permanent 12V power source as well as a good grounding point on the chassis of your vehicle. Then, you'll be able to begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, be sure to protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
After the wires have been connected, you can connect the battery and turn on the engine to test the function of the immobiliser. When everything is functioning correctly, you can install it in a secure place beneath the dash or anywhere else in the vehicle. Be sure to cover it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it is in compliance with the highest standards of security and is a great deterrent to car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. It is also simple to use and can be set into an auto valet mode so that your car will not be activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
The system is also undetectable by thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals, but instead uses CAN data for communication with your ECU. It doesn't require any modifications to your existing key fobs.
Enter the sequence to disarm (either two or one button) and turn on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and drive off safely.
Once installed The Ghost Immobiliser can safeguard your vehicle from key cloning and hacking while preserving the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to give your vehicle to service or valet park.
To complete a Ghost Immobiliser installation, you'll have to find an energy source that is constant (12V) and a grounding point. Make sure that both are well-insulated and can be touched. car stolen with ghost immobiliser are also recommended for bundling and securing the wires. This reduces the risk of theft by potential thieves. Be sure to check the exact locations of these points to avoid committing a mistake, and mark them with a piece of tape or label. Check every connection for signs that they're getting worn out. Make sure all connections are in place and properly insulated. Don't forget to test the Ghost Immobiliser after installation is complete. This will make sure that the unit is operating correctly and that all connections and insulation are safe. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your car's ECU in order to prevent unauthorised motor starting. Its innovative technology safeguards your vehicle against hacking and key cloning along with other methods used by thieves to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to offer the ultimate security for your car. The Ghost's unique features and secluded design make it a popular choice for car lovers and security-conscious drivers alike.
It is important to follow the procedures for installation to ensure complete integration of the Ghost Immobiliser. The best place to start is to refer to the wiring diagram of your vehicle, which will serve as a guideline to locate and connecting the wires required. The next step is to identify the power source as well as grounding points. Once you've found them you'll have to mark them in a way that they're easily identifiable when installing. It's essential to use high-quality materials and tools. Basic hand tools can aid in making precise connections. A multimeter will verify electrical values, and ensure safety. Cable ties and insulation tape will keep the connections tidy and neat. Finally, a user manual will give specific guidelines specific to your Ghost model.
Before proceeding with the installation it is important to test the system by entering the PIN code and then starting the vehicle. This step will confirm the immobiliser works as intended and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine inspections of the vehicle to ensure the system is always working correctly.
Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will keep your car and its contents safe from would-be thieves and ensure that nobody is able to escape with your car without the proper PIN code. The Ghost can also be paired with a tracker approved by Thatcham to identify any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those made by the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to the strictest standards and procedures for installing our products. This assures customers, insurance companies, and law enforcement agencies that all installations are done safely and properly.